Electric Bike Maintenance Tips: How to Look After Your Bike

How are you going to take care of your electric bike? Here are several electric bike maintenance tips that will help your e-bike look new all the time.

Electric bikes are a terrific form of transportation, but if they are not properly maintained, they may cause more difficulty than they are worth and cost a lot of money. Regular maintenance may keep your e-bike in pristine shape and lessen the likelihood of future major repairs.

This tutorial describes how to maintain your electric bicycle, including cleaning the bike, applying lubricants, doing regular component inspections, updating software and applications, and caring for the battery.

When doing e-bike maintenance, it is essential to note that both mechanical and electrical components need care. Electric bicycles feature the same mechanical components as conventional bicycles, plus an electrical motor that needs maintenance.

Here are some DIY electric bike maintenance suggestions:

Regular Cleaning as Electric Bike Maintenance Tips

Frequent cleaning will prevent dirt, dust, and debris from entering the engine and interfering with the motor. It also aids in keeping all mechanical elements moving without rubbing against one another or obstructing the chain. Once or twice a week, e-bikes should be cleaned.

When cleaning your e-bike, you should not use a pressured hose or water stream. This might damage the integrity of the food surrounding the electrical equipment and cause it to deteriorate, resulting in exposed and moist electrical systems that fail. Instead, use a low-pressure water stream or a moist towel to dry the bicycle after cleaning it.

Ebike batteries and motors are sealed devices and should not allow water to enter. However, you should avoid jet washing any bicycle, electric or not, since the force of the water might push its way through the various seals.

Your e-bike should be washed using water from a bucket or low-pressure hose, a brush, and (optionally) a bike-specific cleaning agent to remove dirt and grime efficiently.

Ensure that all connections stay sealed by leaving the battery in its housing, but switching off the e-bike system prior to cleaning it (and make sure it is not charging).

Check the inside charging ports and remove any accumulated grime with a dry cloth or brush. Close the port when cleaning the bike.

After washing the bicycle, pat it dry with a clean towel, avoiding the disc brakes so as not to contaminate them with oil or other cleaning chemicals used elsewhere on the bicycle.

Occasionally, it may be necessary to clean the battery contacts. This may be accomplished with a soft, dry brush, a clean towel, and (optionally) switch lubrication.

If your bicycle includes a life-extension battery (an optional second battery that may be added for longer rides), you should always detach it before cleaning and use a soft, dry brush to clean the connections.

Your e-wheel bike may have a speed sensor magnet. To prevent any difficulties, wipe this with a gentle cloth.

Tire pressure

The sidewalls of your bicycle tyres should indicate the optimal tire pressure for appropriate usage. Using a simple pressure gauge, it is possible to determine the current tyre pressure. If it's too low, or if the tyres visibly deflate when you press your finger into them, you should take out your bike pump and inflate them to the pressure specified on the tires.


To maintain the mechanics in working condition, you may lubricate the chain and other important moving elements, such as the gears. Before adding a lubricant to the chain, it should be cleaned using a specialised cleaning solution. Ideally, this should be done at least once a week if the bicycle is often used.

Examine the Bolts

Check for any loose screws, bolts, nuts, or other components on the bicycle. If there is excessive play in the bolts, tighten them slightly and try to determine the source of the looseness. Do not overtighten the bolts.

Brake pads

Every few weeks, inspect the brake pads on your bicycle to determine their condition. If you do not have efficient brakes, you might be involved in a catastrophic accident. Brake pads may be changed quickly and affordably whenever required.

Battery Maintenance

The battery is the most significant electrical component on the bike. Before charging, read the manufacturer's instructions on how to charge it correctly. Improper charging is likely to result in damage to the battery and accelerated wear. Replacement batteries may be expensive, so take care of the battery you have and extend its lifespan as much as possible.

Although it may seem hard to maintain a sealed battery, there are several ways to keep your e-bike's battery in great shape.

All lithium-ion batteries degrade and lose capacity progressively over time. This may only amount to around 5% of the maximum annual payment, but it is anticipated. Taking care of the battery, storing it properly, and keeping it charged can extend its lifespan.

If you routinely unplug your battery, wipe it with a moist cloth and remove any debris from the contacts with a dry brush.

Additionally, periodically clean and gently oil the battery connections. Never use a high-pressure jet wash or high-pressure hose to clean the batteries.

The battery should be charged at room temperature in a dry environment. To increase the battery's longevity, avoid keeping it completely charged or entirely depleted for extended periods of time.


E-bike maintenance is necessary to prevent costly repairs or replacements in the future. These fast and simple maintenance tasks that you can do yourself can significantly increase the life of your electric bike.

Looking for an e-bike? The eelo 1885 EXPLORER Electric is the ideal choice for the train commuter, caravanner, motorhome owner, or boating enthusiast. Take the hard work out of cycling and avoid the sweat with electric biking.

Please contact us promptly if you are considering purchasing a new ebike but are unsure about which type to buy.

Leave a comment

Please note, comments need to be approved before they are published.